k-torc.com >> Products >> Pneumatic Actuators >> C series - Aluminum >> Text  
  Operating Conditions & Air Consumption, Packing and Weight 
C series - Aluminum - Operating Conditions & Air Consumption, Packing and Weight 

Operating Conditions
1. Operating media
 Dry or lubricated air, or the non-corrosive gasses .
 The maximum particle diameter must less than 30um.
2. Air supply pressure
The minimum supply pressure is 2.5 Bar
The maximum supply pressure is 10 Bar
3. Operating temperature
Standard(NBR O-ring):-20˚C~+80˚C
Low temperature(Silicon rubber O-ring):-35˚C~+80˚C
High temperature(Fluorubber O-ring):-15˚C~+150˚C
4. Travel adjustment
Have adjustment range of  5º  for the rotation at 0º and 90º
5. Application
Either indoor or outdoor

 



Air Consumption


Air volume opening & closing 

                                                                                            Unit:L     
Model
Air volume opening
Air volume closing
Model
Air volume opening
Air volume closing
C-52
0.12
0.16
C-140
2.5
2.2
C-63
0.21
0.23
C-160
3.7
3.2
C-75
0.3
0.34
C-190
5.9
5.4
C-83
0.43
0.47
C-210
7.5
7.5
C-92
0.64
0.73
C-240
11
9
C-105
0.95
0.88
C-125
1.6
1.4

Air Consumption depends on Air Supply. Air volume and Action cycle times, the calculating as follows:
L/Min=Air volume (Air volume opening+Air volume closing)x[(Air Supply(Kpa)+101.3) ¸101.3]xAction cycle times (/min)


 

Weight table

                                                                                                                                                                                                                             Unit:kg
Model
 C-52
  C-63
 C-75
 C-83
 C-92
 C-105
 C-125
 C-140
 C-160
 C-190
  C-210
 C-240
Weight(SR)
1.5
2.2
2.9
3.6
5.5
6.7
10.4
14.4
23.3
46.1
53.2
73.3
Weight(DA)
1.4
2.1
2.7
3.3
5
5.9
9
12
19
39.1
44.1
59

 


Packing conditions


Packing in cartons with foams, then in plywood case.


 

  • Previous: C series - Aluminum - Out Torque(2)

  • Next: C series - Aluminum - Size Information & How To Order
  • [Close]
    Copyright© Kempe Engineering Pty Ltd
    Head Office: 50 Gheringhap St, Geelong, Victoria, Australia 3220